You discovered our blog Cheap Acoustic Guitars. Please Remember to bookmark this page Tube Preamp. If you enjoy our post Tube Preamp, show your love by hitting one of the social media buttons above for this page.
Tube Preamp
ART Pro MPA II Studio 2-Channel Tube Preamp
Recording Music at Home
The first thing you are going to need to invest in if you want to build a great home studio these days is a high quality computer with plenty of hard drive space and lots of RAM. Luckily high quality computers are getting less and less expensive. I recently bought a PC with 8GB of RAM for just $800.
After you get your high quality computer (you may already have one that will get the job done) you need DAW software (DAW stands for "Digital Audio Workstation") that you will be doing your mixing and recording with. The so called "industry standard" is Pro Tools but it's definitely not the only choice (or necessarily the best choice.)
What you get after that initial purchase of a computer and a DAW really depends on what kind of music you are interested in making. If you want to make entirely electronic music with no recording of vocals or real instruments then you may want to look into various plugins at this point but most people (even those doing mostly electronic music) will want to be able to record vocals and instruments and will need some sort of audio interface.
I should note that many audio interfaces come with a basic DAW program so you can kill two birds with one stone when you buy your audio interface.
So what is an audio interface? To put it in the simplest possible terms, it's the "in between" between your audio inputs and your computer. Personally I use the E-MU 1616M and I highly recommend it for those on a PC who don't need a lot of inputs. But there's really a huge selection of audio interfaces available, it's too big of a subject to cover in detail. Again the "industry standard" is Pro Tools but that's not necessarily the best way to go.
Another "must have" for most people is a microphone. A good quality microphone will allow you to record vocals and all sorts of acoustic instruments. It will clearly be a very important part of your home studio. If you can afford it, I would recommend checking out the Shure KSM44. I've been using this mic for years and I very highly recommend it.
Your audio interface will have a built in preamp that will be good enough to get you started, but you will likely want to upgrade to an external preamp at some point. One very cool (and very affordable) option is the ART MPA Gold. It allows you to get that sweet "tube" sound for just $300. Plus it gives you two channels to work with. On top of that, many people replace the stock tubes that it comes with and get an even higher quality sound quality by doing so.
Once you get all of this gear you get to the really important part of recording music, learning how to use it! Recording and mixing music can be a pretty complex thing so if you are new to it, I really recommend getting some books on the subject to help you through the growing pains.
About the Author
Recording Music at Home
is now an affordable endeavor. Once you have the basic gear you need to get started
Recording Music at Home
down you can move on to things such as an
ART Pro VLA II Tube Compressor
.
If you are looking for a different item here are a list of related products on Cheap Acoustic Guitars, please check out the following:

Frequently Asked Questions...
Does having a preamp pedal make a huge difference in my guitar's effect chain?
I've been checking out the Electro Harmonix tube preamp pedal.
Answer:
In short, the answer is yes and no. You will boost your signal, which will increase overall gain, but may also increase noise.
You want to put a preamp pedal as closer to your guitar, cable-wise, as possible, as a preamp takes a quiet sound and amplifies it - the more cable in-between, the higher the chance of noise being amplified along with your signal.
The direction that I've gone is to have my tech install an onboard buffer circuit right into my guitar. What this does is takes my high-impedance signal straight off of the pickups and turn it into a low-impedance signal. This lets me drive long stretches of cable and multiple pedals with no tone loss (depending on the pedals, of course).
This guy built the buffer circuit by hand, so you won't find it anywhere, but other companies make buffer circuits or on-board preamps that you or your tech can install right into your guitar. Or you can find a circuit over the net and make it yourself, if you are inclined in that direction. Just be careful if you do, don't electrocute yourself or anything.
The benefit, again, is that you amplify signal, not noise, keeping your tone pure.
A low-impedance signal will make it sound like you have more highs than you did before, which may require some adjustments on your pedals and/or amp. It probably won't raise your overall signal level much, so it won't necessarily drive your amp any harder, but extra treble can be a very very good thing, as more treble makes it easier to hear you overdriving your amp with less gain, improving clarity.
You can also think about getting EMGs or other types of active pickups, like Seymour Duncan's active pickups. Basically they'll function like an onboard preamp, boosting the crap out of your signal and hammering the front of your amp with oodles of gain. With a good buffer circuit, you can combine the two for even better results....
Look into the onboard stuff before you look into an external pedal, at least if you have one "go to" guitar. I don't think EH makes bad pedals, I just haven't used them cuz they're expensive and I really have to spend my "music money" as efficiently as possible.
Saul
























































































